how to enable graphics card in macbook pro 2010

#How to enable graphics card in macbook pro 2010 mac os x#
#How to enable graphics card in macbook pro 2010 install#
#How to enable graphics card in macbook pro 2010 full#

I ran into the exact same issue around the same time like you. This is definitely the easiest/cheapest option, but to have such a computer and not be able to use the graphics card seems like a real shame. Would this necessarily fix the issue?Ģ) Is there any way to 'fix' the graphics card?ģ) Keep using gfxCardStatus and only use the integrated graphics card. I am just wondering what my options are (any input on any of these would be appreciated!):ġ) Replace the logic board. I installed gfxCardStatus, and have discovered that the computer runs fine using the integrated card, but as soon as I switch to the discrete card - the screen goes. Since then, the screen has gone awry on numerous occassions - each time necessitating a hard reset. The computer was working fine, when all of a suddent the screen when completely blue. However, as of two days ago, the problem has become substantially more severe. Since I've had the computer, the screen would get a blue tint when the computer switched between them. It has two graphics components: an AMD Radeon HD 6750M and a built-in Intel HD Graphics 3000. The impact is clear, even on “light” things.I have an early 2011 MacBook Pro (2.2 GHz Intel Core i7, 8 GB 1333 MHz DDR3 memory) running OS 10.8.2. With the external GPU, equivalent to a 9600M GT GPU, it comes down to only 125. Hard gamers will not be enthusiastic, cause it is very slow.Ī simple example on Xbench : the graphic score passes from 163 with the IGP (GeForce 9400M) to 171 with my MacBook Pro dedicated GPU (9600M GT). I use two screens on the card: a 1 680 x 1 050 20-inch screen and a 1 600 x 1 024 22-inch screen, which require much more than the poor 200 MB/s.

#How to enable graphics card in macbook pro 2010 full#

But on the other sire, videos via VLC or Flash (and what does not properly use the GPU for decoding in general) are choppy in full screen. In my case, it is perfectly suitable for the office work or for video decoded by the GPU (via QuickTime). The PCI-Express really limits performances. With about 200 MB/s measured, it is below what is necessary to simply display an image 1 280 x 1 024 at 60 frames/s. You just need a box with a suitable power supply, a ViDock 4 or 4 +.

#How to enable graphics card in macbook pro 2010 mac os x#

Theoretically, it should work with any Mac OS X compatible card (basically what happens on a Mac Pro). With the jumper, you can add a delay so that the card starts after the Mac, but early enough that Mac OS X does not crash. By default, the card starts at the same time as the Mac EFI and do not like it. Little trick : you must modify a jumper on the box to boot. The card is also not recognized as a GeForce GT120 but as a GeForce 9500 GT.

#How to enable graphics card in macbook pro 2010 install#

No need for other hacks, just install the. Then you have to play the “hackintosh” for it to work : I had to install ATY_init, a tool that actually inject the “BIOS” of the card in the Mac OS X drivers. I tested both models and I use the GeForce GT120 everyday. It is easy to find, it does not consume too much and it is silent. The easiest way on Mac is to use a Mac Pro card, like the Radeon HD 2600 XT or the GeForce GT120. I have a ViDock 3 (power of only 75 W) and so I had to choose a mid-range card. Secondly, you need a compatible graphic card. On the 2006 MacBook Pro Core Duo, it works but it disables the internal graphic card (according to those who tried). On the 2007, 20 MacBook Pro, I don’t have any clue and it does not work a priori. It also prevents reboots (as it must be off) and standby.įrom what I’ve seen on the Internet, it works well on the 2006 MacBook Pro Core 2 Duo and on the 2011 MacBook Pro, the Thunderbolt must be helping. Clearly, I needed to connect the card with the computer turned off. I tested it on a 17 inch 2009 MacBook Pro (MacBookPro5,2) and it works partially: the GPU can not be removed while on or plugged. First of all, the support depends strongly on the model. In theory, it should work putting a compatible graphic card on Mac OS X. The 17-inch Unibody MacBook Pro (2009, 20) are also equipped.

This connector is available on the 15 and 17-inch aluminium 2006, 20 MacBook Pro. ViDock boxes allow you to connect a graphic card externally, on Express Card. Proud owner of a box of this type, I will test it, obviously with an Mac OS X orientation. An American company has indeed boxes that can contain an ExpressCard card or any PCI-Express card. An external graphic card on a Mac? Some dream of.